Quark pilot plant reactors in 10 and 20 Liter volumes are available complete or by individual components. Each cylindrical reactor is available with or without a cooling or heating jacket with 1" beaded pipe connectors for fluid circulation to the jacket, a 5-neck 200 mm reactor head with 45/50 center, 1-45/50 side and 3-29/42 side ports, a quik-release clamp with a silicon o-ring, a removable 22 mm no-hold up bottom drain valve with KALREZ o-rings and a 1" beaded pipe take-off for drainage or fluid transfer. Each reactor also is available with a stainless steal support rack, powerful overhead stirrer with a controller, a stirring system with a 19 mm polished stirring shaft, teflon stirrer bearing and J-Kem temperature monitor with a teflon probe. In addition, these systems include a coiled condenser with a jacket and internal threaded adapters as needed. Additional accessories are available including solid or liquid addition funnels, offset adapters, thermowells, aspirators and stoppers. Optional Air-driven stirring motors are available upon request.
Unit of Measure

Individual Components

N/A 5 Neck Lid, 200 mm Flange (QRA-4-6) Universal Coupling, 19 mm (QSI-40-4) 20 Liter Jacketed Reactor Only (QRA-92-2) 22 mm No-holdup Drain Valve, 1" bp (QRA-92-4) Stainless Steel Lid Clamp, 200 mm (QCL-4-5) Condenser, Coil/Jacketed, 400 mm, 29/42 (QC-75-4) 45/50 Teflon Stirrer Bearing (QSI-4-6) 19 mm Polished Stirring Bearing (QRA-92-12) Teflon Paddle, 6" (QSI-25-2) Teflon Turbine, 6" (QSI-26-2) Stainless Steel Support Rack w/casters (QRA-101-2) J-Kem Temp Monitor (QTC-4-1) Type T Temp Probe, 1/4"x 30 (QTC-26-8) Stirring Motor with controller (QSI-77-1) Chuck for stirring motor (QSI-69-5)

N/A

  • Portable
  • Easy Set-up
  • Turn-key Operation
  • Electronic or Air Driven Motor
  • Flush Bottom Drain Valve for Maximum Product Yield
  • Stainless Steel and Aluminum Support Frame
  • 10-50 Liter Capacity
  • Jacketed or Unjacketed Vessel