Quark pilot plant reactors in 10 and 20 Liter volumes are available complete or by individual components. Each cylindrical reactor is available with or without a cooling or heating jacket with 1" beaded pipe connectors for fluid circulation to the jacket, a 5-neck 200 mm reactor head with 45/50 center, 1-45/50 side and 3-29/42 side ports, a quik-release clamp with a silicon o-ring, a removable 22 mm no-hold up bottom drain valve with KALREZ o-rings and a 1" beaded pipe take-off for drainage or fluid transfer. Each reactor also is available with a stainless steal support rack, powerful overhead stirrer with a controller, a stirring system with a 19 mm polished stirring shaft, PTFE stirrer bearing and J-Kem temperature monitor with a PTFE probe. In addition, these systems include a coiled condenser with a jacket and internal threaded adapters as needed. Additional accessories are available including solid or liquid addition funnels, offset adapters, thermowells, aspirators and stoppers. Optional Air-driven stirring motors are available upon request.

Quark pilot plant reactors in 10 and 20 Liter volumes are available complete or by individual components. Each cylindrical reactor is available with or without a cooling or heating jacket with 1" beaded pipe connectors for fluid circulation to the jacket, a 5-neck 200 mm reactor head with 45/50 center, 1-45/50 side and 3-29/42 side ports, a quik-release clamp with a silicon o-ring, a removable 22 mm no-hold up bottom drain valve with KALREZ o-rings and a 1" beaded pipe take-off for drainage or fluid transfer. Each reactor also is available with a stainless steal support rack, powerful overhead stirrer with a controller, a stirring system with a 19 mm polished stirring shaft, PTFE stirrer bearing and J-Kem temperature monitor with a PTFE probe. In addition, these systems include a coiled condenser with a jacket and internal threaded adapters as needed. Additional accessories are available including solid or liquid addition funnels, offset adapters, thermowells, aspirators and stoppers. Optional Air-driven stirring motors are available upon request.

Quark pilot plant reactors in 10 and 20 Liter volumes are available complete or by individual components. Each cylindrical reactor is available with or without a cooling or heating jacket with 1" beaded pipe connectors for fluid circulation to the jacket, a 5-neck 200 mm reactor head with 45/50 center, 1-45/50 side and 3-29/42 side ports, a quik-release clamp with a silicon o-ring, a removable 22 mm no-hold up bottom drain valve with KALREZ o-rings and a 1" beaded pipe take-off for drainage or fluid transfer. Each reactor also is available with a stainless steal support rack, powerful overhead stirrer with a controller, a stirring system with a 19 mm polished stirring shaft, PTFE stirrer bearing and J-Kem temperature monitor with a PTFE probe. In addition, these systems include a coiled condenser with a jacket and internal threaded adapters as needed. Additional accessories are available including solid or liquid addition funnels, offset adapters, thermowells, aspirators and stoppers. Optional Air-driven stirring motors are available upon request.

Quark pilot plant reactors in 10 and 20 Liter volumes are available complete or by individual components. Each cylindrical reactor is available with or without a cooling or heating jacket with 1" beaded pipe connectors for fluid circulation to the jacket, a 5-neck 200 mm reactor head with 45/50 center, 1-45/50 side and 3-29/42 side ports, a quik-release clamp with a silicon o-ring, a removable 22 mm no-hold up bottom drain valve with KALREZ o-rings and a 1" beaded pipe take-off for drainage or fluid transfer. Each reactor also is available with a stainless steal support rack, powerful overhead stirrer with a controller, a stirring system with a 19 mm polished stirring shaft, PTFE stirrer bearing and J-Kem temperature monitor with a PTFE probe. In addition, these systems include a coiled condenser with a jacket and internal threaded adapters as needed. Additional accessories are available including solid or liquid addition funnels, offset adapters, thermowells, aspirators and stoppers. Optional Air-driven stirring motors are available upon request.

Quark pilot plant reactors in 30 and 50 Liter volumes are available complete or by individual components. Each cylindrical reactor is available with or without a cooling or heating jacket with 1" beaded pipe connectors for fluid circulation to the jacket, a 7-neck 300 mm reactor head with 55/50 center, 3-45/50 side and 3-29/42 side ports, a 300 mm phenolic flange clamp with 12 SS bolts, a removable 22 mm no-hold-up bottom drain valve on 2" bp with KALREZ o-rings and a 1" beaded pipe take-off for drainage of fluid transfer. Each reactor also is available with a stainless steel support rack with a supporting shelf for the reactor body, powerful overhead stirrer with a controller, a stirring system with a 19 mm or 32 mm polished stirring shaft, PTFE stirrer bearing and a J-Kem temperature monitor with a PTFE probe. In addition, these systems include a coiled condenser with a jacket and internal threaded adapters as needed. Additional accessories are available including solid or liquid addition funnels, offset adapters, thermowells, aspirators and stoppers. Optional Air-driven stirring motors are available upon request.

Quark pilot plant reactors in 30 and 50 Liter volumes are available complete or by individual components. Each cylindrical reactor is available with or without a cooling or heating jacket with 1" beaded pipe connectors for fluid circulation to the jacket, a 7-neck 300 mm reactor head with 55/50 center, 3-45/50 side and 3-29/42 side ports, a 300 mm phenolic flange clamp with 12 SS bolts, a removable 22 mm no-hold-up bottom drain valve on 2" bp with KALREZ o-rings and a 1" beaded pipe take-off for drainage of fluid transfer. Each reactor also is available with a stainless steel support rack with a supporting shelf for the reactor body, powerful overhead stirrer with a controller, a stirring system with a 19 mm or 32 mm polished stirring shaft, PTFE stirrer bearing and a J-Kem temperature monitor with a PTFE probe. In addition, these systems include a coiled condenser with a jacket and internal threaded adapters as needed. Additional accessories are available including solid or liquid addition funnels, offset adapters, thermowells, aspirators and stoppers. Optional Air-driven stirring motors are available upon request.

Quark pilot plant reactors in 30 and 50 Liter volumes are available complete or by individual components. Each cylindrical reactor is available with or without a cooling or heating jacket with 1" beaded pipe connectors for fluid circulation to the jacket, a 7-neck 300 mm reactor head with 55/50 center, 3-45/50 side and 3-29/42 side ports, a 300 mm phenolic flange clamp with 12 SS bolts, a removable 22 mm no-hold-up bottom drain valve on 2" bp with KALREZ o-rings and a 1" beaded pipe take-off for drainage of fluid transfer. Each reactor also is available with a stainless steel support rack with a supporting shelf for the reactor body, powerful overhead stirrer with a controller, a stirring system with a 19 mm or 32 mm polished stirring shaft, PTFE stirrer bearing and a J-Kem temperature monitor with a PTFE probe. In addition, these systems include a coiled condenser with a jacket and internal threaded adapters as needed. Additional accessories are available including solid or liquid addition funnels, offset adapters, thermowells, aspirators and stoppers. Optional Air-driven stirring motors are available upon request.

Quark pilot plant reactors in 30 and 50 Liter volumes are available complete or by individual components. Each cylindrical reactor is available with or without a cooling or heating jacket with 1" beaded pipe connectors for fluid circulation to the jacket, a 7-neck 300 mm reactor head with 55/50 center, 3-45/50 side and 3-29/42 side ports, a 300 mm phenolic flange clamp with 12 SS bolts, a removable 22 mm no-hold-up bottom drain valve on 2" bp with KALREZ o-rings and a 1" beaded pipe take-off for drainage of fluid transfer. Each reactor also is available with a stainless steel support rack with a supporting shelf for the reactor body, powerful overhead stirrer with a controller, a stirring system with a 19 mm or 32 mm polished stirring shaft, PTFE stirrer bearing and a J-Kem temperature monitor with a PTFE probe. In addition, these systems include a coiled condenser with a jacket and internal threaded adapters as needed. Additional accessories are available including solid or liquid addition funnels, offset adapters, thermowells, aspirators and stoppers. Optional Air-driven stirring motors are available upon request.