Quark pilot plant reactors in 30 and 50 Liter volumes are available complete or by individual components. Each cylindrical reactor is available with or without a cooling or heating jacket with 1" beaded pipe connectors for fluid circulation to the jacket, a 7-neck 300 mm reactor head with 55/50 center, 3-45/50 side and 3-29/42 side ports, a 300 mm phenolic flange clamp with 12 SS bolts, a removable 22 mm no-hold-up bottom drain valve on 2" bp with KALREZ o-rings and a 1" beaded pipe take-off for drainage of fluid transfer. Each reactor also is available with a stainless steel support rack with a supporting shelf for the reactor body, powerful overhead stirrer with a controller, a stirring system with a 19 mm or 32 mm polished stirring shaft, PTFE stirrer bearing and a J-Kem temperature monitor with a PTFE probe. In addition, these systems include a coiled condenser with a jacket and internal threaded adapters as needed. Additional accessories are available including solid or liquid addition funnels, offset adapters, thermowells, aspirators and stoppers. Optional Air-driven stirring motors are available upon request.
N/A22 mm No-holdup Drain Valve, 2" bp (QRA-95-4) 32 mm Polished Stirring shaft (QRA-95-12) 50 Liter Jacket Reactor Only (QRA-95-2) 55/50 PTFE Stirrer Bearing (QSI 4-7) 7 Neck Lid, 300 mm Flange (QRA-9-3) Condenser, coil/jacketed, 500 mm, 45/50 (QC-75-5) J-Kem Temp Monitor (QTC-16-1) PTFE Paddle 6" (QSI-25-2) PTFE Turbine 6" (QSI-26-2) Stabelizer Coupling, 32 mm (QSI-79-5) Stainless Steel Lid Clamp, 300 mm (QCL-4-12) Stainless steel support rack with casters (QRA-101-5) Stirring Motor electric with controller (QSI-83-1) Type T Temp Probe 1/4" x 48" (QTC-26-10)
Electronic or Air Driven Motor
Flush Bottom Drain Valve for Maximum Product Yield